Copper Rivets & Burrs #9 YOUR choice of quantity & length Made in USA SCA belt

Description

Copper Rivets & Burrs # 9
YOUR CHOICE of size:  3/8", 1/2", 5/8", 3/4", 7/8", 1", 1, 1/4", 1 1/2"
These superior quality two part fasteners are made in the USA by an Amish manufacturer and are of the highest quality.  Having long used these fasteners over several decades, we decided to offer them to the general public as they are great to work with.
This style of rivet is a two part with rivet and burr.  The rivet is inserted through the materials that you wish to connect and then the burr is forced down onto the shaft of the rivet to form an interference fit.  The shaft of the rivet that extends past the burr is trimmed as needed and then peined with a hammer to mushroom it and lock it permanently in place.   Our rivets are shipped with the corresponding # of burrs included but you can also buy more here if you'd like.   R
ivet length is overall length, not shaft length.
These copper rivets and burrs are a 99.9% purity solid ( CDA 110) and will not corrode.  They are superior heavy-duty fasteners useful for:
Medieval armor building such as the SCA/MSR/WMA
Leather craft
Bike seats
Tack and harness construction and repair
Vintage wood boat repair and joinery
Saddlery
Specifics:
Rivets:
.468" for the head diameter (.456 - .48)
.058" for the head height
.161" for the body diameter (.157 - .165)
.145" for the point diameter (.141 - .149)
Burrs
.438" Outside Diameter
.146" Inside Diameter
.040" thickness.
All +/- manufacturing tolerances
We now offer Burrs sold separately. There are more than 1000 in a lb.
Quantities are based upon industry standards. We don't hand count each box, however we do guarantee that the overall weight delivered is as promised.
Please note, we sell rivets by both weight and count.  We think that the above counts represent a fair average but if you need a certain number for your project we encourage you to order a bit more to handle variability and possible challenges in successfully setting the rivet on your work.
Rivet Count
One pound of 3/8" length #9 FH copper leather rivets contain about 195 sets
One pound of 1/2" length #9 FH copper leather rivets contains about 147 sets. (hand count)
One pound of 5/8" length #9 FH copper leather rivets contains about 137 sets.
One pound of 3/4" length #9 FH copper leather rivets contains about 120 sets.
One pound of 7/8" length #9 FH copper leather rivets contains about 100 sets.
One pound of  1"   length #9 FH copper leather rivets contains about 81 sets.
One pound of 1 1/4" length #9 FH copper leather rivets contains about 75 sets.
One pound of 1 1/2" length #9 FH copper leather rivets contains about 70 sets.
Advertised length is the measurement from the face of the rivet head to the tip.  While a belt rivet of this type does tend to settle into the surface of the leather, you will want to take this into account when selecting. Longer is not a problem as you'll most often trim before peening.
We once again are able to offer the #9 x 3/4"
ROUND HEAD
copper rivet and burrs which have a count of about 86 sets/lb.
** Shaft Length note on the Round Head #9 - 3/4" is the actual shaft length not including head. **
Tool Options:  Side Strike and End Strike Burr Setting Tools:
To better meet the needs of our customers, we also offer two tool options for setting the burr in place.
The Stainless-Steel side-strike rivet and burr setting tool is made made in China and can be used on #12 & #9 size rivets.
The case hardened steel - end strike is also made in China and has a light knurled cross sections for solid grip and is rivet size specific to the #9.
Both of these are available for purchase in the drop down menu.
Notes:
Please be aware that the pictures are representations of our products. There may be variations from piece to piece.
Satisfaction policy:
Your happiness with our products is a top priority. See our feedback and know that this represents our sincere commitment to our customers. Please contact us if you have any problem with what we've sent. The deal's not done till everyone leaves smiling.
Handling time:
We generally ship in just a few days but we also attend a large event called The Pennsic War takes us away from the workshop for several weeks every July/August.  We continue to accept orders while we are gone and will send things out within a few days of returning home.  Watch for the away message and note the handling time.  Please let us know if you are in urgent need by a specific date and we'll do our very best to accommodate your schedule.
We are happy to ship internationally and insurance is included in this rate.
Custom works happily considered for belts, shields or body armor.
For more detail on what we can do visit our Facebook page called Dark Victory Armory or find us on the web.
Best Regards and Thanks for Visiting!
Jordan
Chief Armorer
Dark Victory Armory