Power Steering Rack and Pinion Assembly For 2001 2002 2003 2004 2005 Lexus IS300

Description

Part Number
26-2622, 44250-53020
Fitment
LEXUS  IS300  2001-2005
Description
High-quality replacement 100% tested For reliability and performance Undergone strict tests to ensure reliable performance Hydraulically Tested to Ensure Internal By-Pass for Both High and Low Pressures Top performance For long service life
Note
Please confirm your original part number or oem numbr can matche up with one of the part numbers above
Top_vehicle_electrical
Power Steering Rack and Pinion Assembly For 2001 2002 2003 2004 2005 Lexus IS300
Part Number
26-2622, 44250-53020
Fitment
LEXUS  IS300  2001-2005
Description
High-quality replacement
100% tested For reliability and performance
Undergone strict tests to ensure reliable performance
Hydraulically Tested to Ensure Internal By-Pass for Both High and Low Pressures
Top performance For long service life
Note
Please confirm your original part number or oem numbr can matche up with one of the part numbers above
In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation.
Professional installation is highly recommended (No Instruction Included)
For whatever we can help,please feel free to contact us via ebay message.
The role of steering gear
A power "steering rack" or "steering gear" is a rack gear and a pinion gear that transmits the steering wheel rotation inside of your car to tire movement outside of your car. Most modern steering racks have either a hydraulic pump for assist or electric motor for assist. The rack is connected to the outer steering mechanisms with tie rod ends.
It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels.
It provides a gear reduction, making it easier to turn the wheels.
If you find the following problems, please check or replace them in time
Steering fluid leak
Unresponsive steering
Steering wheel vibration
Clunking noise when turning
Tight steering wheel
Steering wheel not returning
Death wobble
Replace the Steering Rack
Put the wheels in a straight-ahead position. The steering wheel should be in the center position. Remove the key from the ignition and make sure the steering wheel is locked You do not want the steering wheel to turn while removing the rack. Doing so will make it possible for the spiral cable in the steering wheel to unwind and become useless.Crack loose all the wheel lug nuts
Raise and support the vehicle with approved jack stands.
Remove both front wheels.
Remove the Steering Shaft Coupler Outer Seal and unbolt the upper pinch bolt on the Steering Shaft Coupler assembly.
Detach the outer tie rod ends. You may need to use a special tie rod end puller to get them off. You can rent one at the local rental store.
Most times a sharp rap with a BFH on the end of the tie rod mount will shock it loose. Do not hit the tie rod end itself.
Remove any parts required to gain access to the rack mounting bolts, lines and steering coupling.
Depending on accessibility, at this point, you can remove the power steering rack mounting bolts, or crack the power steering high pressure and return lines.
Depending on accessibility, at this point, you can remove the power steering rack mounting bolts, or crack the power steering high pressure and return lines. It may be easier to get a wrench to swing on a power steering line fitting once you've unbolted the rack and moved it a bit. Also, reattaching the lines may be easier before the new rack is bolted in place.
Place a drain pan under the vehicle and remove the hydraulic power steering pressure hose and power steering return hose from the power steering rack.
Now comes the fun part, twist and turn and jiggle it out through one of the wheel well openings. Make sure the kids are in the house because certain words will be necessary to coax the rack out and they are not words little ears should hear.
If the new rack has new tie rod ends, measure the overall length of the old rack and tie rod assembly. Set the overall length of the new assembly to this same dimension by twisting the tie rod ends on their threads. Keep the rack centered and split the overlap difference between the left and right rod ends as you do this, or the steering wheel will be off-center when you're done.
If you are reusing the old tie rod ends, crack the lock nuts loose. Count how many full turns it takes to remove the tie rod ends. Center the new rack and install tie rod ends the same number of turns on the new rack. Again, check the overall length and split the difference.
Install the new rack using the same words you used to get it out.
Reconnect the power steering lines, using new "O" rings, if required. Usually, the high-pressure line uses a slightly larger "O" ring so be careful not to mix them up.
Reconnect the Steering Shaft Coupler assembly and bolt the rack back into place.
Reattach the tie rod ends to the steering knuckles. Use new cotter pins for the castellated nuts; never reuse the old cotter pins.
Put the wheels back on and torque the lug nuts to specifications.
Remove the return line from the power steering pump and place the end into a bucket.
Fill the power steering pump and start the engine until clean fluid comes out of the return hose. You may be able to install an inline filter in the return line to protect the new rack. I have known guys who have used fuel filters for this purpose.
Have the front end aligned to reset the toe-in adjustment to specification or the vehicle will handle poorly and wear out the tire quickly.
Item Specifics
Type
Rack & Pinion
Rack Type
Hydraulic
Surface Finish
Polished, Rust Protected
Manufacturer Part Number
TOP670013
Brand
KAC
Manufacturer Warranty
5 Years
OE/OEM Part Number
26-2622, 44250-53020
Fitment
LEXUS IS300 2001-2005
UPC
997750670013
Payment
1.We accept only PayPal payment.
2.All major credit cards are accepted through secure payment processor PayPal.(If you use e-check on PayPal, delivery may take longer, as we will hold your order until your e-check clear)
3.Payment should be completed within 7 (seven) days of auction closing. Or unpaid dispute will be filed for closing auction.
4.We send all the items are based on your paypal address,Therefore, please make sure your paypal address is valid.
* International Buyers Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check your country’s custom office to determine whether these additional costs will be prior to bidding / buying.
Shipping
1.We only ship this item to United State!
2.We ship to your eBay address. Each package will be shipped to USA by UPS or Fedex with tracking number.
Please check your shipping address carefully before checkout, it can't be changed if order completed.
3.Ship within 1-2 business day once payment completed. Orders placed on weekend will be shipped within 3 days.
ONLY ship to PayPal shipping address.
Please make sure your PayPal shipping address is correct before finalizing order and submitting payment.
4.We only ship to the shipping address submitted with the payment.
We will not be responsible for item loss due to wrong or unknown address.
Seriously promise:
Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.
Returns
1.If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact me before you return it.
2.Defective items Must Be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID.
3.Return shipping is to be paid by the Buyer.
4.We act as a responsible seller; we are willing to actively undertake the following responsibilities:
b. The item is damaged during transport;
c. Due to our work errors, transporting the wrong items to the buyer;
d. The item in the actual use of the process of quality problems.
Contact us
Please leave five stars positive feedback positive comment and Five-Stars.
Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,
communication Please!
(NO)  Three stars is LOW star, NO 1,2,3 stars PLEASE!
(YES)  Please give us Five-star!
Have Question or Problem??
Step 1: Contact seller
Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message. NO others please!
Select a topic:
I have a question about using my item or I want to send the seller a message(0)(YES)
YES, THIS ONE!!! We will try our best to solve online if possible, if not, will give correct return address.
I did not receive my item(2)(NO)
I need to return my item(1)(NO)
I receive an item that was not as described(1)(NO)
Request to cancel this order(1)(NO)
Step 3: Describe your question clearly; we will give you the best solution
We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication!
1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.
2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.
About us
If you send email to us,In our working hours will be resumed within 48 hours.
Please feel free to contact us if you have any questions:
Dear my friend,we appreciate your support.And our goal is service you well and give you a pleasant shopping time in our store.
(1)Not receive in time;
(2)Item broken;
(3)Not satisfied with the item...
we will try our best to handle it well within 24hours,
our working time is 8:00-12:00am,14:00-18:00pm(Beijing Time),
from Monday to Saturday,except International Holiday.
Top_vehicle_electrical
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Starter
Alternator
Running Board Step bar
Headlights Assembly
A/C Compressors & Clutches
AC Condenser
Radiator
Window Regulator
Power Steering Pump
Filter
Other
Hot Item
KAC High Torque Mini Starter SBC BBC for CHEVY 350/454 Black 153 168 Tooth 19695
USD 79.99
Headlights Assembly For 2003-2006 Chevrolet SIlverado 1500 HD 2500 HD Chrome
USD 68.99
KAX For Mercedes-Benz Chrysler Dodge 907-744 Engine Camshaft Position Sensor
USD 14.99
All Weather Floor Mats for 2014-2019 2015 Toyota Highlander 8 Seat Front Rear
USD 85.99
KAC Power Steering Pump 96-5419 For Acura 2002-2006 RSX 2.0L/2006-2008 TSX 2.4L
USD 55.99
Excellent Delivery
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
New List Item
Front Brake Rotors + Brake Pads For 00-06 Chevy Avalanche Express Suburban Tahoe
USD 133.99
For 2007-13 Toyota Tundra 08-17 Sequoia Headlight Assembly Left+Right Clear Lens
USD 147.83
2Pcs 15x6-6 Turf Tires Lawn Mower Tractor 4 Ply Rated 15x6-6 Tubeless 570Lbs KAC
USD 64.99
71 inch Enhanced heavy duty Throttle cable for Manco/American sportworks Go Kart
USD 11.99
Rear Left/Right CV Joint Axle For Polaris RZR S 900 1000 2015 2016-2019 4X4
USD 61.99
Power Steering Rack and Pinion Assembly For 2001 2002 2003 2004 2005 Lexus IS300
Part Number
26-2622, 44250-53020
Fitment
LEXUS  IS300  2001-2005
Description
High-quality replacement
100% tested For reliability and performance
Undergone strict tests to ensure reliable performance
Hydraulically Tested to Ensure Internal By-Pass for Both High and Low Pressures
Top performance For long service life
Note
Please confirm your original part number or oem numbr can matche up with one of the part numbers above
In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation.
Professional installation is highly recommended (No Instruction Included)
For whatever we can help,please feel free to contact us via ebay message.
The role of steering gear
A power "steering rack" or "steering gear" is a rack gear and a pinion gear that transmits the steering wheel rotation inside of your car to tire movement outside of your car. Most modern steering racks have either a hydraulic pump for assist or electric motor for assist. The rack is connected to the outer steering mechanisms with tie rod ends.
It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels.
It provides a gear reduction, making it easier to turn the wheels.
If you find the following problems, please check or replace them in time
Steering fluid leak
Unresponsive steering
Steering wheel vibration
Clunking noise when turning
Tight steering wheel
Steering wheel not returning
Death wobble
Replace the Steering Rack
Put the wheels in a straight-ahead position. The steering wheel should be in the center position. Remove the key from the ignition and make sure the steering wheel is locked You do not want the steering wheel to turn while removing the rack. Doing so will make it possible for the spiral cable in the steering wheel to unwind and become useless.Crack loose all the wheel lug nuts
Raise and support the vehicle with approved jack stands.
Remove both front wheels.
Remove the Steering Shaft Coupler Outer Seal and unbolt the upper pinch bolt on the Steering Shaft Coupler assembly.
Detach the outer tie rod ends. You may need to use a special tie rod end puller to get them off. You can rent one at the local rental store.
Most times a sharp rap with a BFH on the end of the tie rod mount will shock it loose. Do not hit the tie rod end itself.
Remove any parts required to gain access to the rack mounting bolts, lines and steering coupling.
Depending on accessibility, at this point, you can remove the power steering rack mounting bolts, or crack the power steering high pressure and return lines.
Depending on accessibility, at this point, you can remove the power steering rack mounting bolts, or crack the power steering high pressure and return lines. It may be easier to get a wrench to swing on a power steering line fitting once you've unbolted the rack and moved it a bit. Also, reattaching the lines may be easier before the new rack is bolted in place.
Place a drain pan under the vehicle and remove the hydraulic power steering pressure hose and power steering return hose from the power steering rack.
Now comes the fun part, twist and turn and jiggle it out through one of the wheel well openings. Make sure the kids are in the house because certain words will be necessary to coax the rack out and they are not words little ears should hear.
If the new rack has new tie rod ends, measure the overall length of the old rack and tie rod assembly. Set the overall length of the new assembly to this same dimension by twisting the tie rod ends on their threads. Keep the rack centered and split the overlap difference between the left and right rod ends as you do this, or the steering wheel will be off-center when you're done.
If you are reusing the old tie rod ends, crack the lock nuts loose. Count how many full turns it takes to remove the tie rod ends. Center the new rack and install tie rod ends the same number of turns on the new rack. Again, check the overall length and split the difference.
Install the new rack using the same words you used to get it out.
Reconnect the power steering lines, using new "O" rings, if required. Usually, the high-pressure line uses a slightly larger "O" ring so be careful not to mix them up.
Reconnect the Steering Shaft Coupler assembly and bolt the rack back into place.
Reattach the tie rod ends to the steering knuckles. Use new cotter pins for the castellated nuts; never reuse the old cotter pins.
Put the wheels back on and torque the lug nuts to specifications.
Remove the return line from the power steering pump and place the end into a bucket.
Fill the power steering pump and start the engine until clean fluid comes out of the return hose. You may be able to install an inline filter in the return line to protect the new rack. I have known guys who have used fuel filters for this purpose.
Have the front end aligned to reset the toe-in adjustment to specification or the vehicle will handle poorly and wear out the tire quickly.
Item Specifics
Type :
Rack & Pinion
Rack Type :
Hydraulic
Surface Finish :
Polished, Rust Protected
Manufacturer Part Number :
TOP670013
Brand :
KAC
Manufacturer Warranty :
5 Years
OE/OEM Part Number :
26-2622, 44250-53020
Fitment :
LEXUS IS300 2001-2005
UPC :
997750670013
Payment
Shipping
Returns
Contact us
About us
1.We accept only PayPal payment.
2.All major credit cards are accepted through secure payment processor PayPal.(If you use e-check on PayPal, delivery may take longer, as we will hold your order until your e-check clear)
3.Payment should be completed within 7 (seven) days of auction closing. Or unpaid dispute will be filed for closing auction.
4.We send all the items are based on your paypal address,Therefore, please make sure your paypal address is valid.
* International Buyers Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check your country’s custom office to determine whether these additional costs will be prior to bidding / buying.
1.We only ship this item to United State!
2.We ship to your eBay address. Each package will be shipped to USA by UPS or Fedex with tracking number.
Please check your shipping address carefully before checkout, it can't be changed if order completed.
3.Ship within 1-2 business day once payment completed. Orders placed on weekend will be shipped within 3 days.
ONLY ship to PayPal shipping address.
Please make sure your PayPal shipping address is correct before finalizing order and submitting payment.
4.We only ship to the shipping address submitted with the payment.
We will not be responsible for item loss due to wrong or unknown address.
Seriously promise:
Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.
1.If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact me before you return it.
2.Defective items Must Be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID.
3.Return shipping is to be paid by the Buyer.
4.We act as a responsible seller; we are willing to actively undertake the following responsibilities:
b. The item is damaged during transport;
c. Due to our work errors, transporting the wrong items to the buyer;
d. The item in the actual use of the process of quality problems.
Please leave five stars positive feedback positive comment and Five-Stars.
Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,
communication Please!
(NO)  Three stars is LOW star, NO 1,2,3 stars PLEASE!
(YES)  Please give us Five-star!
Have Question or Problem??
Step 1: Contact seller
Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message. NO others please!
Select a topic:
I have a question about using my item or I want to send the seller a message(0)(YES)
YES, THIS ONE!!! We will try our best to solve online if possible, if not, will give correct return address.
I did not receive my item(2)(NO)
I need to return my item(1)(NO)
I receive an item that was not as described(1)(NO)
Request to cancel this order(1)(NO)
Step 3: Describe your question clearly; we will give you the best solution
We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication!
1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.
2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.
If you send email to us,In our working hours will be resumed within 48 hours.
Please feel free to contact us if you have any questions:
Dear my friend,we appreciate your support.And our goal is service you well and give you a pleasant shopping time in our store.
(1)Not receive in time;
(2)Item broken;
(3)Not satisfied with the item...
we will try our best to handle it well within 24hours,
our working time is 8:00-12:00am,14:00-18:00pm(Beijing Time),
from Monday to Saturday,except International Holiday.
All rights reserved.