STEERING SHAFT Steering Column Lower Shaft for Chevy Tracker Suzuki Vitara

Description

STEERING SHAFT
,
Lower intermediate
Steering Shaft with Coupling
(M
ounts between the upper steering shaft and steering rack)
HAS THE LARGE LUXURY BUSHING FOR A COMFORTABLE STEERING WHEEL EXPERIENCE -  SEE  PICTURE.
# 3 in Image
(You can also refer to Basic Replacement below)
STOCKED IN OUR WAREHOUSE FOR IMMEDIATE SHIPPING
(No third party drop ship delays or Cancellation)
13 MONTH WARRANTY LIMITED TO REPLACEMENT IF CONFIRMED FAULTY
INCLUDES LARGE RUBBER BUSHING TO ABSORB VIBRATION AND SHOCK
WE PURCHASE THESE WELL MADE STEERING SHAFTS DIRECT FROM THE FACTORY.
SHIPS PRIORITY / EXPEDITED MAIL
(GM, PR, AK, HI, APO, Prot, Intern)
Yes,
sí,
Oui
,
sim
FITS
1999-2009 Chevy Tracker
1999-2005 Suzuki Grand Vitara
1999-2004 Suzuki Vitara
SUZUKI GRAND VITARA/ESCUDO SQ416/SQ420/SQ625 1998-2006, SUZUKI GRAND VITARA/GRAND ESCUDO XL-7 JA627 2001-2006
BASIC REPLACEMENT  Tracker /Vitara (Seek additional instructions as yours may vary)
KEEP STEERING COLUMN LOCKED AT ALL TIMES DURING REPLACEMENT
With wheels straight and key removed.
Use approximately 7 “extension and 12 mm socket, under the vehicle just behind the CV joint you can gain access to the lower bolt.
Remove the bolt.
Use 18” extension with a 12 mm socket (maybe a swivel) to come down thru the top and access the upper two bolts. Remove the bolts.
Use a pry bar to widen the Coupler. Tap it onto the steering shaft being replaced
Widen the lower coupling and pull it off. If using original hardware, make sure it is all clean using a wire wheel and inspect.
A battery post cleaner may be handy for certain application. Also, clean the gear on the rack but avoid the rack seal.
The lower coupling of the new shaft may need to be widened slightly before installing onto the rack. Install the upper and tap the coupler up.
Install the bolts, make sure no resistance that they are property lined up at the slots.
Important – Once tightened, look at the bolts with a good light to make sure the lock washers fully drew against the unit (misalignment with the slots can offer resistance making the bolts feel tight before inspection).
Turn the steering wheel from side to side a few times and recheck the bolts.
RETURNS -
SELLER DOES NOT ACCEPT RETURN
WARRANTY / DEFECT
–  THESE ARE INSPECTED BY US FOR VISIBLE ISSUES,  13 Month limited to  REPLACEMENT IF CONFIRMED MANUFACTURER DEFECT.