Super Short Stubby Car Drying Nozzle for DeWalt 60V Flexvolt DCBL772 Leaf Blower

Description

Leaf Blower Not Included
Learn more and keep up to date on developments at @RNoksDesigns
Super Short / Stubby Nozzle for DeWalt 60V Flexvolt DCBL772/DCBL772B/DCBL772X1 Leaf Blower
Replaces factory black nozzle and clear nozzle connector
Requires opening of tool
using Torx T15 wrench (not included). It's not all that difficult. See pictures for more info. It should take 5-10min (most of the time is spent removing screws!) I am not responsible if you damage your blower, void warranty, etc.
Reduces nozzle length to 97.5mm / 3.8in. Compare that the factory clear tube is 147mm / 5.8in Plus a nozzle has to be installed on top of that.
Leaf blower + Nozzle = only 20.5" in total length!
Large Nozzle final diameter is the same as OEM DeWalt long nozzle (you will get roughly the same speed and airflow)
Small Nozzle final diameter is 65mm / 2-1/2" (you will get increased speed with narrower blast area)
Oval Nozzle overall area is about the same as the Small Nozzle
Built tough with thick walls and large large reinforcing rim at end of nozzle
Custom designed and manufactured by myself, 3D printed in the USA.
Made with PETG filament which when compared to the commonly used PLA, offers improved strength and also high heat resistance (PLA has a poor resistance to heat and can cause deformation).
Not interested in opening up your leaf blower? Check out my other
listing
Here
for a stubby nozzle that connects to the end of the clear tube. Same shapes, just a bit longer overall tool length.
Silly Fine Print
Designed for genuine DeWalt DCBL772/DCBL772B/DCBL772X1 Leaf Blower, will not work with other models.
Leaf blower not included